|
|
|||
|
|
|
|||
|
The A1 Envirotech range of portable
field testing equipment has products that will support utilities with
the task of managing the issues surrounding SF6 use at best practice
levels. |
||||
|
MP1000 SF6 Multi - Parameter
Condition Monitoring Instrument As
a part of routine maintenance, a number of parameters of SF6
should be measured in order to correctly assess condition.
When used as an insulating medium in high voltage switchgear, SF6
can breakdown under fault conditions producing further
hydrofluorocarbons (HFCs) and Perfluorocarbons (PFCs).
The MP1000 offers a 4-in-1 unit giving accurate measurement of
Acidic Breakdown Products, SF6 Purity, Oxygen levels and Moisture (Dew
Point): · Simple operation. · Established detection techniques
Electrochemical for Acidity and Oxygen, Thermal Conductivity for SF6
purity and Aluminium Oxide for moisture (Dew Point). · Data-logging. · Fully portable. Rechargeable Nickel Hydride batteries with 10 hour operation.
|
MF1000 SF6 Portable Mass Flow Controller The
very first fully automatic, portable Mass-Flow Controller for SF6
measurement that allows traceable accurate measurement of the use of SF6
gas during fill or top-up operations. · Unit available in two formats: 15kg/hr
for top-up and 50kg/hr for fill operations. · Simple operation. · Automatic data-logging for full
traceability. · Fully Portable - uses rechargeable
batteries, giving up to 5 hours operation. · Facility to operate from a mains power
supply. · Fully automatic operation, just set the
parameters, press GO and the unit will fill the plant equipment
with the correct amount of gas at the required pressure, before shutting
down. · Audible alarm for failure or finish operations.
|
|||
 Top of page
End of Page
Transformer Oil
Analysis |
||||
|
OM1000P - Oil Moisture Meter Highly
accurate - 1ppm detection Maintenance
free - no calibration required Fast - 1
minute per test Traceable -
validation check kits available Portable
-10 hrs operation
|
|||
|
OA1000 - Oil Acidity Meter Low level
detection - 0.01mg/g KOH Electrode
titration - no need for colour indicator Wide
detection range - 0.01- 5.0 mg/g KOH Traceable -
validation check kits available |
|||
|
OSP1000 - Oil Sampling Pump Easy
sampling of transformer oil
Contamination free
|
|||
|
SF6 Gas Analysis |
||||
|
HF1000 - SF6 Acidity Meter Detection
range - 0.1ppmw to 100ppmw
Electrochemical HF sensor - robust Sensor
response - less than 60 seconds Easy
sampling system - uses quick connects for minimal SF6 waste
Weatherproof to IP67 Built in
sample pump and flowmeter |
|||
|
OX1000 - SF6 Oxygen Meter Detection
range - 1ppm -10,000ppm Long life
electrochemical cell - solid state, robust and accurate Long life
battery - 45 days continuous operation
|
|||
|
SF6 Purity Analyser Absolute
purity measurements - 0 -100% Minimal gas
usage Rugged,
portable and weatherproof to IP67 High
accuracy with rapid response Non -
depleting sensor Built-in sample pump and flowmeter |
|||
|
PDM1000 - SF6 Moisture Meter Dewpoint
range - 100°C to 20°C' Aluminium
oxide sensor - robust and accurate The
smallest unit available Fast
response - 40°C to - 60°C in 90 seconds |
|||
|
GasBadge Plus - Personal Gas Alarm CO H2S O2 NO2 SO2 Low cost personal monitoring. |
|||
|
| ||||
|
1 Lacy Gate Place Woodend, North Canterbury.
Phone 03 310 0480 Fax 03 310 0485 WEB www.adaptnz.com
Steve Offord Regional Manager Mobile 021 507 831 email sofford@adaptnz.com |
||||
Back